Best Hack Squat and Leg Press Combo Machines (2027): 8 Picks

A combo machine gives you two of the best leg exercises on one frame: the hack squat for quad and glute drive, and the leg press for heavy, safe loading. It is the most space-efficient way to build strong legs at home.

We compared popular hack squat and leg press combo machines on Amazon, looking at price, build, weight rating, included features and customer ratings. The right choice depends on your space, budget and how hard you plan to train.

Below are our top picks, a comparison table, detailed reviews and a buying guide. For related reading, see the best hack squat machines, compact leg press machines, compact hack squat machines.

Top 3 hack squat and leg press combo machines

hack squat and leg press combo machines Comparison

1. Dripex Leg Press Hack Squat Combo – Dripex

Dripex’s combo is our top pick because it switches between leg press and hack squat in seconds, takes 2 inch plates up to 1,200 lb and costs about $540, with 161 ratings at 4.4 stars.

Dripex’s 45-degree combo switches between leg press and hack squat in seconds. The carriage takes 2 inch plates up to 1,200 lb.

Four safety lock positions plus a limit position provide dual security, and four plate holders add stability. It fits users from 5 ft to 6 ft 6 in.

It holds a 4.4-star average from about 160 reviews, but it is long at about 82 inches.

It offers strong value for a 45-degree combo, with good safety features and a broad height range. If you have the length, it delivers a full commercial-style leg press and hack squat for well under $600.

For home lifters with enough length, it is one of the easiest combos to recommend: switching modes is quick, the safety system is generous and the carriage holds plenty of plates. Place it on rubber flooring and leave about 2 ft behind for loading.

It is the most affordable combo with a solid rating count. The trade-offs are a lower weight rating than 1,500 lb machines and no linear bearings. For a first leg machine, it is the best value.

Best for: Budget combos

May not fit: Heavy lifters over 1,200 lb loads

Check Price on Amazon

2. GMWD Leg Press Hack Squat Combo – GMWD Combo

GMWD’s 45-degree leg press and hack squat combo uses linear bearings and is rated to 1,500 lb, with 408 ratings at 4.5 stars for about $770.

GMWD’s 45-degree combo uses linear bearings with triple the load capacity of standard bearings and is rated to 1,500 lb. It holds a 4.5-star average from about 400 reviews.

It is very stable but long at about 84 by 47 inches and weighs 385 lb, so it is not truly compact.

It suits home gyms with a dedicated corner and lifters who plan to train legs heavy for years. The weight storage keeps it planted, and owners frequently mention how smooth the sled feels compared with roller-based machines in the same price range.

On paper, you get 45-degree, linear bearings, 1,500 lb rated, plate storage. Its biggest strengths are 4.5 stars from 400+ buyers and high capacity; keep in mind 84 in. long before ordering.

Best for: Heavy lifters wanting a combo

May not fit: Compact spaces

Check Price on Amazon

3. RitFit Leg Press Hack Squat Machine – RitFit Combo

RitFit’s leg press and hack squat combo uses linear bearings and is rated to 1,200 lb, with 375 ratings at about $800.

RitFit’s leg press and hack squat combo uses linear bearings rather than rollers for a smoother sled, and it is rated to 1,200 lb. Two rear plate holders add stability when loaded.

Its footprint, about 56 by 41 inches, is the smallest of the full combos here, though it stands about 76 inches tall. It holds a 4.4-star average from about 375 reviews.

It costs about $800 and weighs 238 lb.

Its compact base is unusual for a full combo machine, and the linear bearings make the sled feel smooth even with heavy plates. For home gyms that want commercial-style leg pressing and hack squats in the smallest footprint, it is the most proven option.

Set the shoulder pads so you can stand fully upright at the top, and use a medium foot position high on the platform to share the work between quads and glutes. Move your feet lower and closer for more quad emphasis. Rack the sled on the safety stops between sets, and keep plates on the rear holders to stabilize the frame.

The specifications to note are leg press + hack squat, rear plate storage, 55.9 x 40.6 x 75.6 in., 238 lb. In daily use the advantages are 4.4 stars from 370+ buyers and smooth linear bearings, and the drawbacks are $800 and heavy to move.

Best for: Smooth sled travel

May not fit: Tight budgets

Check Price on Amazon

4. RitFit 3-in-1 Leg Press and Hack Squat – RitFit 3-in-1

RitFit’s 3-in-1 adds leg press, forward hack squat and reverse hack squat on a 1,500 lb frame for about $960.

RitFit’s 3-in-1 combines a leg press with forward and reverse hack squats on a 1,500 lb frame. The reverse hack adds glute and hamstring emphasis.

It measures about 83 by 45 inches and weighs 300 lb, and it costs about $960. It has 23 reviews averaging 4.4 stars.

Use the forward hack for quads, the reverse hack for glutes and hamstrings, and the leg press for heavy compound work, rotating them across the week. That variety makes it a strong single machine for lifters who want complete lower-body training at home.

Key details include leg press, forward and reverse hack, 1,500 lb capacity, steel frame. Buyers most often praise that it is reverse hack adds glute work and three machines in one, while the main trade-offs to weigh are long footprint and $960.

Best for: Variety in one machine

May not fit: Compact spaces

Check Price on Amazon

5. Goimu L5 30-Degree Leg Press / Hack Squat – Goimu L5

Goimu’s L5 uses a 30-degree sled for quad focus and a compact footprint at about $430, with a 4.6-star average.

Goimu’s L5 uses a 30-degree sled angle instead of the usual 45 degrees. That relaxed angle isolates the quads and is easier on the lower back and knees, and it shortens the machine.

Unlike many combos where seat pads restrict depth, the L5 allows full ass-to-grass range of motion. The backrest has seven positions and the pedals six. It is rated to 1,000 lb and measures about 71 by 45 inches and 55 inches tall.

It has 20 reviews averaging 4.6 stars, and the frame is light at 83 lb. Plates are needed.

For small home gyms, the 30-degree angle is the real advantage: the sled travels a shorter distance and the machine is shorter than 45-degree combos, while still allowing deep squats and presses. It suits lifters who want a compact leg machine without giving up range of motion.

To get the most from it, use the seven backrest settings to find a position where your lower back stays flat at the bottom of each rep, then adjust the pedals so your knees track over your toes. Start with moderate plates to learn the 30-degree groove, which feels different from a 45-degree sled, and progress steadily from there.

On paper, you get 30-degree sled, atg depth, 7 backrest + 6 pedal positions, 1,000 lb rated. Its biggest strengths are shorter than 45-degree combos and under $450; keep in mind 20 reviews before ordering.

Best for: Smaller spaces and joint-friendly angles

May not fit: Heavy loads

Check Price on Amazon

6. GMWD Pendulum Squat Machine – GMWD Pendulum

GMWD’s plate-loaded pendulum squat mimics a natural squat with an upright torso, with a 4.7-star average at about $800.

GMWD’s pendulum squat is a plate-loaded leverage machine that mimics a natural squat with a more upright torso. The counterbalance makes the bottom easier and the top harder, matching your strength curve.

It targets quads, glutes and adductors with less lower-back stress than a barbell squat. It is rated to 800 lb and measures about 62 by 43 inches and 62 inches tall.

It costs about $800 and does one movement, but it holds a 4.7-star average from 46 reviews.

Pendulum squats are popular for building quads with less lower-back stress, and this machine brings that movement home in a footprint shorter than most sled machines.

Lifters who find barbell squats hard on the lower back often switch to pendulum squats for quad training. Keep your back flat against the pad, push through the whole foot and use a full, controlled range of motion. Plates load at the back of the arm, so leave clearance behind the machine.

The specifications to note are counterbalance: easier at bottom, 800 lb rated, 62 x 43 x 62 in., 287 lb. In daily use the advantages are 4.7-star average and shorter than sled machines, and the drawbacks are single movement and heavy.

Best for: Quad and glute training with less spine load

May not fit: Combo seekers

Check Price on Amazon

7. Titan Fitness Vertical Leg Press – Titan Vertical

Titan’s vertical leg press has a 400 lb capacity at about $410 with 140 ratings.

Titan’s vertical leg press puts you on your back and has you press straight up, driving quads, hamstrings, glutes and calves without loading your spine. It supports up to 400 lb of plates on three weight horns.

Four starting heights fit different users, and the 11-gauge steel frame is heavy-duty. The footprint is just 48 by 38 inches.

The 400 lb limit and vertical position, which can be hard on the hips, are the trade-offs. It holds a 4.4-star average from 140 reviews.

It is the most space-efficient plate-loaded leg press in this guide and suits lifters who want heavy leg pressing in a corner of a small room.

Keep your lower back flat on the pad and lower the sled only as far as you can without your hips rolling up. Start light to learn the movement, since the vertical position feels different from a 45-degree press.

Key details include vertical press, 400 lb plate capacity, 4 starting heights, 11-gauge steel, 3 weight horns. Buyers most often praise that it is tiny 48 x 38 in. base and heavy-duty steel, while the main trade-offs to weigh are max 400 lb and vertical press can strain hips.

Best for: Compact leg press training

May not fit: Hack squat seekers

Check Price on Amazon

8. PASYOU PM30Pro Seated Leg Press – PASYOU PM30Pro

PASYOU’s PM30Pro is a seated plate-loaded leg press at about $300 with 2,340 ratings.

PASYOU’s PM30Pro is a seated, plate-loaded leg press built into an adjustable bench. The front rack takes 1 inch and 2 inch plates, and the frame is ASTM-certified to 1,300 lb for users from 64 to 79 inches tall.

Eight backrest angles turn it into a weight bench for chest, shoulder and arm work, and a lower rack holds dumbbells. It is just 19 inches wide and rolls on wheels. More than 2,300 buyers rate it 4.4 stars.

It is not a sled-style leg press, so loads are lower than full machines, and shorter users may need an extra pad.

For apartments and small home gyms, it is one of the most practical leg machines available: narrow, mobile, multi-purpose and backed by a huge number of buyers.

In practice, it works best as a hybrid: press legs with plates on the front rack, then raise the backrest for dumbbell presses, rows and core work. Wheels make it easy to roll against a wall after training, which is ideal in an apartment.

On paper, you get plate-loaded front rack (1 in./2 in.), 8 backrest angles, doubles as a bench, 1,300 lb astm rated, fits 64 to 79 in. users. Its biggest strengths are 4.4 stars from 2,300+ buyers and rolls away on wheels; keep in mind not a sled-style press before ordering.

Best for: Entry leg training

May not fit: Hack squat seekers

Check Price on Amazon

How to Choose a Compact Leg Press or Hack Squat

Plate-loaded versus hydraulic

Hydraulic leg presses need no plates and are very compact and quiet, which makes them popular in apartments and for rehab. They offer concentric-only resistance, so you push against the cylinder and the return is controlled for you. Plate-loaded machines give you a true eccentric, scale to much higher loads and feel like a commercial leg press. For building strength and size, choose plates. For gentle training, older users or tight spaces where plate storage is a problem, a hydraulic unit makes sense.

Multi-function options

Many combos switch between leg press and hack squat in seconds, and some add reverse hack squats, calf raises or bench functions. A multi-function machine saves space and money overall if you would otherwise buy two separate machines. Check how quickly each conversion takes and whether you need tools. Reverse hack squats shift emphasis to the glutes and hamstrings, which balances quad-heavy leg pressing. A bench function, like the PASYOU models, is useful if you have no room for a separate weight bench.

Sled angle and machine length

Most combo machines use a 45-degree sled, which needs 80 inches or more of length. A 30-degree design like the Goimu L5 or a vertical press shortens the footprint considerably. Pendulum and seated designs are shorter still. Measure your room and pick the angle that fits, keeping in mind that steeper angles shorten length but increase height. Also check the seat and backrest height when the sled is at its lowest point, since that sets the minimum ceiling height for some designs.

Load capacity and plate storage

Look at the rated sled capacity and how many plates fit. Ratings from 400 to 1,500 lb are common. Built-in plate storage at the rear improves stability and keeps plates off the floor. If you plan to press heavy, choose a machine rated at least 1,000 lb. Plate storage near the sled also makes loading faster, which matters on a machine you will load with hundreds of pounds.

Linear bearings versus rollers

Linear bearings give the smoothest, quietest sled travel and handle heavier loads. Roller wheels are cheaper but can feel rough. Smooth travel matters more on a leg press than almost any other machine because you control a heavy sled through a long path. Read reviews for comments about sled noise or sticking, since smoothness is hard to judge from specs alone.

Range of motion

Some combos restrict depth because of the seat or pad position. Look for machines that allow full depth, and check the backrest and foot plate adjustments. A large foot plate lets you change stance to target quads, glutes or hamstrings. Lifters with long legs should check that the foot plate allows a deep bend without the hips rolling off the pad.

Safety stops

Multiple safety lock positions let you set the bottom of each rep and rack the sled at any point in the range, which is essential when you train without a spotter. Never use a leg press or hack squat with the safeties disengaged. Look for at least three or four lock positions plus a separate limit stop, and check that the release handles are easy to reach from the working position. On pendulum and vertical machines, the stop pins should be set so the sled cannot drop past a depth you can control.

FAQ

What is a leg press and hack squat combo?

A single machine that lets you switch between a leg press and a hack squat on a sliding carriage.

Which combo is best?

Dripex is the best value and GMWD the best for heavy lifters.

Do combos work as well as dedicated machines?

Most lifters find combos work very well, with only small compromises.

How do I choose a hack squat and leg press combo machine?

Start with your budget and space, then compare weight capacity, build quality and included features. Our buying guide above walks through each factor.

Is it worth buying hack squat and leg press combo machines on Amazon?

Amazon is a good place to compare prices and read reviews, and many sellers offer free delivery. Check the return policy and read recent reviews for assembly and shipping notes before you order.

How much space do I need?

Measure the assembled footprint and ceiling height before you buy, and leave room around the machine to move and change settings.

Final Verdict

Dripex’s combo is the best hack squat and leg press machine for most buyers, with GMWD’s combo the best for heavy loading and RitFit’s linear-bearing combo the smoothest.

See best hack squat machines and compact leg press machines for more.