Best Horizontal Barbell Storage Racks (2027): 6 Wall Gun Racks and Holders

Horizontal barbell storage, often called a gun rack, stores bars side by side across the wall, just like in commercial gyms. It’s the most versatile way to store bars because it handles every type, including trap bars and specialty bars that don’t fit vertical holders.

Horizontal racks also look tidy, protect knurling and make every bar easy to see and grab. The trade-off is wall width: you’ll need a stretch of wall at least as long as your bars, and secure mounting into studs or masonry.

We compared six horizontal barbell storage racks on bar capacity, liners, mounting and price. See also the best vertical barbell storage racks and the best wall-mounted barbell holders.

Top 3 Horizontal Barbell Storage Racks

Horizontal Barbell Storage Rack Comparison

1. CAP Horizontal Bar Wall Rack – Best Horizontal

CAP’s horizontal bar wall rack is our top horizontal barbell storage rack because it does the job well at a price far below premium gun racks. It holds up to three Olympic or standard barbells side by side on the wall, which covers most home gyms: a main Olympic bar, a second bar or women’s bar, and a curl or specialty bar. Horizontal storage keeps each bar fully supported and visible, so you can grab the one you need without lifting others out of the way.

The brackets are precision cut from heavy-gauge steel and lined with UHMW plastic, a slick, very durable material that prevents scratches and dents on your bar’s finish and knurling. That liner is a notable upgrade over cheap racks that let bars sit directly on bare or painted steel. Each bracket measures about 17 inches long by 1.75 inches wide and 5.1 inches tall, and the rack is rated to 300 lb.

Mounting hardware is included, so you can install it on studs in an afternoon. Because the brackets are separate, you can space them to suit the length of your bars, mounting them closer together for short bars or wider apart for full 7-foot Olympic bars. CAP has decades of experience in home gym equipment, and this rack has a 4.5-star average from about 160 buyers.

Its limits are capacity and warranty: three bars is the maximum, and CAP’s warranty is 30 days. If you need more slots, REP’s 8-bar gun rack is the step up, but for most home gyms CAP’s rack is the best value horizontal storage.

Best for: Two or three bars on the wall

May not fit: Large bar collections

Check Price on Amazon

2. REP Fitness Gun Rack Barbell Storage – Best for Large Collections

REP Fitness’s gun rack comes in 3-bar and 8-bar versions, making it the go-to horizontal rack for lifters with many bars. Its high-gauge powder-coated steel supports heavy bars, and it fits Olympic, specialty and trap bars.

The low-profile design adds very little depth, so even an 8-bar rack doesn’t crowd your training area. It gives a garage gym the clean look of a commercial facility and matches REP’s racks and benches.

At about $130 for 8 bars it is pricier, mounting hardware is not included and you need a long, solid wall.

Best for: Big bar collections

May not fit: Short walls

Check Price on Amazon

3. Luwint Horizontal Barbell Holder – Best Single-Bar

Luwint’s horizontal holder is sold as a pair that stores one bar, so you can mount exactly as many as you need. Each solid steel bracket is coated in a thick, textured rubber layer that prevents scratches and keeps the bar from sliding.

The 2.16-inch notch fits weightlifting, Olympic, standard, CrossFit, deadlift and multi-grip bars, and you can adjust the spacing between brackets to match each bar’s length. It’s ideal above a bench or along a short wall.

It costs about $30 per bar, so storing several bars adds up, and it has a 4.2-star average.

Best for: Flexible one-bar-at-a-time storage

May not fit: Large collections on a budget

Check Price on Amazon

4. Lovind Wall Mount Barbell Rack (4 Bars) – Best Budget

Lovind’s 12-gauge steel bracket holds four bars and can be mounted horizontally or vertically depending on your wall. Plastic pads protect bars, and anchors and screws are included.

It’s the cheapest way to store four bars on the wall, with a 4.7-star average from more than 570 buyers, for about $23.

No capacity is listed, so mount it into studs and avoid heavy specialty bars.

Best for: Budget wall storage

May not fit: Heavy bars

Check Price on Amazon

5. Kipika Wall Barbell Holder with Hooks – Best With Accessory Hooks

Kipika’s 5 mm steel rack has five hooks for bars and two end hooks for collars, bands or belts, rated to 300 lb. It includes expansion screws for concrete walls.

Combining bar and accessory storage on one bracket keeps a garage wall tidy, and it has a 4.9-star average.

It fits bars under 33 mm and has fewer than 60 ratings.

Best for: Bars plus accessories

May not fit: Thick-shaft bars

Check Price on Amazon

6. KDNVPS Heavy Duty Wall Barbell Holder – Best Heavy Duty

KDNVPS’s 5.8 mm steel holder carries four bars plus side hooks and is rated to 600 lb, the highest here. Rubber-lined hooks reduce noise and scratches.

It’s a strong choice for heavy bars, for about $30.

It has only about 50 ratings and fits shafts of 25 to 33 mm.

Best for: Heavy bars

May not fit: Thick shafts

Check Price on Amazon

How to Choose Barbell Storage

List every bar you own

Write down each bar in your gym: Olympic barbells, a women’s 15 kg bar, EZ curl and tricep bars, a trap or hex bar, safety squat bar and any specialty bars. Note which have 2-inch Olympic sleeves and which are standard 1-inch bars. Vertical floor holders only take 2-inch sleeves, while wall hangers and gun racks hold bars by the shaft. Trap bars and safety squat bars usually need horizontal storage or a vertical holder with wide spacing. Leave room for at least one more bar, because collections tend to grow.

Vertical floor holders

Floor holders like the Yes4All, Josmimic, niffgaff and Luwint models stand bars upright in tubes. They take only 1 to 3 square feet, fit in corners and require no drilling, which makes them ideal for renters and anyone who rearranges their gym. Look for rubber or plastic tube inserts that protect sleeves, a heavy or wide base for stability, and enough spacing between slots that you can lift one bar without hitting the next.

Wall-mounted vertical hangers

Wall hangers hold bars upright by the shaft, using almost no floor space and costing very little. They need solid studs or masonry anchors and a wall tall enough for a 7-foot bar to stand vertically, typically at least 8 feet of clear height. They work especially well in garages with exposed studs and along walls next to a power rack. Choose hangers with rubber pads to protect the knurling and finish.

Horizontal gun racks

Horizontal racks like the REP Fitness gun rack and CAP’s wall rack hold bars side by side, like in commercial gyms. They protect knurling with plastic or UHMW liners, keep bars easy to grab and display your collection neatly. They need more wall width than vertical storage but very little depth, so they fit above benches or along long walls. They’re the best option for trap bars and bars of different lengths.

Rack-mounted holders

If your power rack has unused upright space, a bolt-on holder stores a bar right where you use it, with no wall drilling or extra floor space. Before buying, check your rack’s upright size and hole diameter, because many holders are designed for 5/8-inch or 1-inch holes on 2×2 or 3×3 uprights, and confirm there is enough height so the bar doesn’t touch the floor.

Combination plate and bar storage

Plate trees with built-in bar holders, like the CAP and SereneLife models, store plates and bars in one footprint, which is useful when you’re setting up a new gym. Wall-mounted combo racks, such as Yes4All’s plate tree and bar holder, free the floor completely. The trade-off is access: when plates are fully loaded, bars can be harder to reach.

Protection and capacity

Rubber, plastic or UHMW liners prevent metal-on-metal contact that scratches sleeves and coatings and makes noise. Check the listed capacity, because wall hangers range from about 40 lb to 600 lb per unit. That matters if you store several heavy specialty bars on one bracket. Floor holders typically list 100 to 500 lb.

Plan installation and clearance

Wall units need studs or proper concrete anchors and a level line, while floor units need a flat surface. Before mounting anything, check ceiling height, garage door tracks, lights and other equipment so you can lift bars in and out without collisions. Place storage close to where you train to reduce how far you carry heavy bars.

FAQ

Is horizontal storage better for barbells?

Horizontal storage supports the bar evenly, keeps knurling protected and fits every bar type, including trap and safety squat bars. Vertical storage is equally safe for the bar and uses less wall width. Choose horizontal if you have a long wall and a mixed collection, vertical if space is tight.

How far apart should horizontal barbell brackets be?

Place the brackets so each one sits on the bar’s shaft, inside the sleeves. For a standard 7.2 ft Olympic bar, that’s typically around 4 feet apart. Shorter bars need brackets closer together, which is why separate brackets like CAP’s and Luwint’s are handy.

Can a horizontal rack hold a trap bar?

Yes. Horizontal gun racks like REP Fitness’s are one of the best ways to store trap bars, which don’t fit most vertical holders.

What height should I mount a gun rack?

Mount the most-used bar between waist and shoulder height so you can lift it without strain, with lighter or less-used bars above or below.

Do horizontal racks scratch barbells?

Not if they have liners. CAP’s rack uses UHMW plastic, Luwint’s uses thick rubber and Lovind’s uses plastic pads.

How many bars do I need horizontal storage for?

Count your bars and add one. CAP’s rack holds three; REP’s gun rack comes in 3 and 8-bar versions.

Final Verdict

CAP’s horizontal wall rack is the best horizontal barbell storage rack for most home gyms, holding three bars on UHMW-lined steel brackets for about $60. REP’s 8-bar gun rack is the step up for large collections.

Luwint’s single-bar holders let you mount exactly what you need, Lovind’s rack is the budget pick, Kipika’s adds accessory hooks and KDNVPS’s is the heaviest-duty option.